The following is the standard base cable that is recommened. (This is what the Trimble 46290-00 (Base Cell phone adapter) will be if it is ever created) It solves DTR (on most phones) and hanging up as soon as the modem when the modem answers. Name | Pin | Receiver Side | Phone Side | Notes | CD | 1 | Not connected | 8 on receiver | | Rx | 2 | Straight though | Straight though | If using a normal download cable cross over with 3 | Tx | 3 | Straight though | Straight though | If using a normal download cable cross over with 2 | DTR | 4 | Not connected | Pin 6 on phone | If DTR doesn't need to be controlled, you don't have to loop 4 and 6 | GND | 5 | Straight though | Straight though | | DSR | 6 | Not Connected | Pin 4 on phone | Not Needed | RTS | 7 | Straight though | Straight though | Connect to pin 8 if not using a 37779 Rev B | CTS | 8 | 1 on modem | Not connected | Connect to pin 7 if not using a 37779 Rev B | RI | 9 | Not connected | Not connected | Not Needed, Not recommend to be connected |
|