QCP-860 Rover Cable

Procedure

Data Collector Set-up:

Init String &D0

    This string turns off the need for DTR (&D0)
     

No special cable is required to use the QCP-860 as a rover with the 5700.

For the 4700/4800 it is best to turn off flow control. In this case a special cable is not required.

Not all versions of the Survey Controller software allow you to turn off flow control. In this case you need to

    Loop CD (D-9 Pin 1) to RTS (D-9 Pin 7) (37779 Rev A)
    Loop CD (D-9 Pin 1) to CTS (D-9 Pin 8) (37779 Rev B)

 

[Home] [Trimble] [Basic Setup] [Phones] [Cables] [Troubleshooting] [Types] [US Carriers] [Internet Links]